izod & charpy impact testing machine

Product Description

Main feature:

The series of impact testing machine for metal materials under dynamic load resistance to impact the performance test, metallurgy, machinery manufacturing, and other units of the necessary testing instruments, is the scientific research unit of new materials indispensable for the research of the testing instrument. The series models are the most commonly used impact testing machine on the market at present.

1.this machine adopts PC microcomputer control, electric lift, impact, microcomputer measurement, operation, screen digital results and can be printed, high efficiency, high test precision. After the impact test sample, the remaining energy is used to automatically set up, the next test preparation, the operation is simple, the work efficiency is high. The computer can calculate and display the material impact absorbing power, the impact toughness, the pendulum angle and the test average value, and can be printed when the test data and the average value of the test.
2.host machine is single column type structure, cantilever hanging pendulum, swing hammer body type U;
3.the impact of the knife with screws installed, the replacement is simple and convenient;
4. sample supported beam type support;
5.the host is equipped with a safety pin, and equipped with a safety net;
6. the test machine for semi automatic control, Yang pendulum, hangs the pendulum, the shock, put are electrical control, and can use thrust specimen residual energy automatic Yang pendulum ready for the next test, especially for in for impact testing laboratory and do a lot of impact test of metallurgy, machinery manufacturing and other departments;
7. testing machine conforms to GB GB/T3803-2002 the pendulum hammer impact testing machine to test ", according to the national standard GB / t229-2007 the metal Charpy Notch Impact Test Method" of metal materials of impact test.

Name	JBW-300B charpy izod Pendulum impact testing equipment machine
Display mode	Microcomputer screen display
Impact energy	150/300J
distance between swing center and impact point	750mm
Impact velocity	5.2m/s
Swing hammer angle	150°
The sample bearing span	40＋0.2mm
Jaw fillet	R1-1.5mm
Impact edge fillet	R2-2.5mm，R8±0.05mm
Sample size	10（7.5、5、2.5）mm×10mm×55mm

Products ShowPacking

impact testing machine in plywood box