Pendulum Impact Testing Machine for Packaging Materials

Pendulum Impact Testing Machine for Packaging Materials

Product Name: Pendulum Impact Testing Machine for Packaging Materials

Product introduction:

The Pendulum Impact Testing Machine for Packaging Materials is an impact testing machine with simple structure and convenient operation. It is used to test the impact toughness of rigid plastic, reinforced nylon, fiberglass, ceramics, cast stone, insulation materials and other non-metallic materials.

Product standard:

ISO179-2000 plastic-hard material charpy impact testing

GB/T1043-2008 hard material charpy impact testing method

JB/T8762-1998 plastic charpy impact testing machine

GB/T 18743-2002 thermoplasticity pipe material charpy impact testing method used for fluid transportation (apply for pipe materials)

ISO180-2000 plastic-hard material izod impact tesing

GB/T1843-2008 hard material izod impact testing method

JB/T8761-1998 plastic izod impact testing machine

ASTM D256-2010 plastic IZOD pendulum impact testing method

Technical parameter:

Name	Izod tester		Charpy tester
Article No.	XBL-5.5	XBL-22	JZL-5	JZL-25	JZL-50
Pendulum energy	2.75J,5.5J	11J, 22J	1J,2J,4J, 5J	7.5J,15J, 25J	25J,50J
Pendulum tilt angle	150°
Impact speed	3.5m/s		2.9m/s	3.8m/s
Pendulum center distance	335mm		221mm	380mm
Impact blade angle			30°
Supporting distance from impact blade to jaw	22mm		60mm, 70mm, 95mm
Impact blade radius	R=0.8±0.2mm		R=2mm±0.5mm